
Float submersible pumps start when the water level in the pit rises and stop when it falls. They are one of the most practical solutions for basement, pit and drainage applications.
Installation tips
- Place the pump on the flat, clean floor of the pit so that it is not buried in mud.
- Adjust the free length of the float cable so that there is a sufficient difference between the switch-on and switch-off levels.
- Make sure the float does not catch on the pit wall, pipes or cables.
- Add a check valve to the discharge line.
- Have the electrical connections made by an authorized person with suitable protection devices.
Against dry running
Because the pump uses the water for cooling, running without water quickly overheats the motor. Setting the float correctly reduces this risk.
Regular inspection
- Clear the pit and pump inlet of mud and debris.
- From time to time, test by hand that the float moves freely.
- Check whether there is any damage to the cable insulation.
Browse our products and get in touch
Contact us for prices and quotes.



