
A significant portion of submersible pump faults can be solved with simple checks. However, remember that we are talking about equipment that works in water and with electricity: cut the power first.
If the pump does not run at all
- Voltage or a phase may be missing.
- The float may be stuck.
- The thermal relay or protection may have tripped.
- There may be a break in the cable or connection.
If it runs but does not pump water
- An air lock may have formed.
- The suction area or impeller may be clogged.
- In three-phase pumps the direction of rotation may be reversed.
- The valve may be closed, or the pipe leaking or clogged.
- The impeller may be worn and the flow reduced.
If it stops and starts frequently
Overcurrent, dry running, constant clogging or insufficient voltage heat the motor and the protection trips frequently. Restarting repeatedly without removing the problem can burn the motor.
When is service needed?
If the problem persists after the simple checks, the pump must be removed from the water and inspected. You can call us for on-site inspection and repair.
Browse our products and get in touch
Contact us for prices and quotes.



