
The most common mistake when choosing a compressor is looking only at motor power or tank volume. What actually matters is the amount of air the machine produces (flow) and the pressure it reaches.
1. Determine your air requirement
Add up the air consumption of all the air consumers you will use (spray gun, pneumatic hand tool, packaging line, cylinder, etc.) from the manufacturers' labels. If they do not all run at the same time, take simultaneity into account; but if you will add equipment soon, leave a reasonable margin above the total.
2. Choose the working pressure correctly
Set the pressure according to the equipment that needs the highest pressure. To allow for pressure losses in the pipeline, filter and dryer, the compressor pressure should be chosen slightly above this value. An unnecessarily high pressure increases energy cost.
3. Consider the duty cycle
- A piston compressor is usually sufficient for workshop and service jobs that run intermittently.
- A screw compressor is preferred for lines that need uninterrupted air all day.
- For jobs where clean air is essential (healthcare, food, painting, laboratory), an oil-free type should be considered.
4. Tank volume
The tank buffers sudden air consumption and prevents the motor from starting and stopping too often. If your consumption fluctuates, a larger tank or an additional air receiver extends the life.
Pre-selection checklist
- Total air consumption and a margin for future growth
- The highest working pressure required
- Daily operating time (intermittent or continuous?)
- Air cleanliness requirement
- Installation site: ventilation, floor and electrical infrastructure
Browse our products and get in touch
Contact us for prices and quotes.



